Showing posts with label cable. Show all posts
Showing posts with label cable. Show all posts

Tuesday, 22 September 2015

EAD offers a new low loss cable RF240

EAD is pleased to offer a new low loss, but flexible coaxial cable ideal for cable runs up to 15M up to 2.7 GHz.

RF240 Low Loss Coaxial Cable

With an overall sheath diameter of 6.10mm, the RF240 cable is still flexible, but offers excellent performance in a cost-effective package.

The typical attenuation figures are as follows:

100 MHz - 7.8 dB/100M
400 MHz - 16.2 dB/100M
600 MHz  - 20.0 dB/100M
1000 MHz - 26.0 dB/100M
1750 MHz - 36.0 dB/100M
2400 MHz  - 43.1 dB/100M

The means that the RF240 cable fits neatly in-between the ever popular BWL195 cable and the lower loss, but thicker BWL400 cable.

RF240 cable and connectors are in stock now. Please contact us for pricing and availability.

Monday, 11 August 2014

4G on the move - a simple guide for optimal reception!


Everybody knows that the 4G networks can bring huge advantages in terms of download speed over and above 3G and 2G networks, but users of 4G networks are just as likely to experience network coverage issues with varying levels of reception and signal strength depending on where they are. So what do we need to consider to ensure we get optimal reception when out and about or when we do not have access to fixed line infrastructure?

Typically, when using 2G and 3G networks, external antennas have been used to deliver increases in signal
strength to wireless devices in fringe areas of coverage. Active repeaters, amplifiers and boosters have licensing issues in quite a number of countries meaning that it can be illegal to use them without network operator consent notwithstanding the cost of the repeater, antennas, accessories etc. Using a passive (and this doesn't necessarily exclude high gain) antenna connected to the router, modem, donge or access point can provide tangible improvements in signal strength, but, depending on the type of antenna deployed, can come at a cost, so let's review the options.

There are a wide number of choices for mobile antennas depending on how or where you locate the antenna - antennas can be window-mounted via adhesive or suction cup, terminal-mounted i.e. fitting the antenna directly onto the router, modem or dongle, alternatively they can be magnetic-mounted on for example a vehicle roof. Two other slightly more permanent ways of mounting mobile antennas can be rail-mounting i.e. on a rail of a boat or screw/stud mounting where the antenna is mounted by way of an integrated stud through a hole in a flat surface (vehicle roof, product enclosure, narrowboat deck etc.).

The performance of such antennas can vary greatly. In most cases size does matter and as a rule of thumb the larger the antenna, the better performance (higher gain) that is on offer. Some antenna solutions such as magnetic antennas can be quite small, but pack quite a punch in terms of performance because they use the metal surface they mount on in order to radiate optimally (do a web search for the LTE-HIGAIN-MAG mag antenna as an example of a high gain, but smallish 4G magnetic antenna). But generally speaking, if you are deploying a very small antenna it is highly likely you will be compromising performance. Obviously though, when you are out and about the last thing you want to do is be lugging round a huge base station antenna on your back, but on the other hand you don't want to use something that is going to make little difference to your signal strength!

When using 4G services, many devices are now MIMO i.e. they have two antenna ports to maximise performance, therefore it might be prudent to consider using a 4G MIMO antennas. It must be noted, however, that most 4G MIMO antennas are not that small or portable so this may prove to be a disadvantage of this technology. The WA700_2700 window-mounted MIMO antenna from Pulse is one exception to the rule and can be suction cup mounted to a vehicle window.

Moving the signal is also an important concept. In a lot of cases it doesn't make sense to locate the 3G/4G antenna right next to the router/modem/dongle. Depending on your location, it might make sense to locate the antenna outside your vehicle, caravan, boat, narrowboat, yacht, cruiser etc and run low loss cable to the device - this means that the antenna picks up the optimal signal and whilst you may suffer a couple of dB signal loss across the cable, the net effect at the device is that the signal is stronger than if the antenna were located at the device. An example in a narrowboat is that a high gain magnetic antenna is located above deck on a metal surface (roof) where the signal is stronger and the router/modem/dongle is located below deck near the user. The much stronger signal above deck is then moved below (minus a couple of dB loss across the cable) to device meaning a net improvement in received signal strength, stability of signal and more often than not improved download speeds.

Another consideration is to locate the antenna and router/modem/dongle in an area of good signal and then use WiFi  (or even Ethernet cable) to distribute the internet access to other areas. Thereby the 4G reception is optimal and users elsewhere in the vehicle/on the boat/in the caravan use WiFI to connect.

It is also wise to check (if possible) what frequency your 4G is operating at - across Europe 4G services are being offered at a variety of frequencies including 800 MHz, 1800 MHz and 2600 MHz - so it is vital to make sure that the antenna you select does indeed support the 4G frequency you are using. For example, some 4G antennas do not operate at 800 MHz which means that in some locations you will not pick up 4G reception at all.

For further advice on your mobile 4G antenna selection, please feel free to visit our websites for a full portfolio of antenna products and RF accessories.

Sunday, 1 June 2014

Weighing up antenna options for 915 MHz? Here are some considerations..

If you are designing or developing wireless applications using the 915 MHz ISM band, choosing the correct antenna for your application can be critical is ensuring your RF perforamnce is optimal. I thought it might be interesting for people working on 915 MHz (or the 900 MHz band more generally) projects, if I listed out a number of diverse external antenna products to aid the developer's understanding of available solutions on the market.

1/4 Wave Whip Antenna

A terminal-mount short 1/4 wave moulded whip antenna (requires a groundplane to mount on) with RP-SMA or SMA connectors typically (TNC, BNC are also possible). Suitable for fixed and portable terminals.

915 MHz Whip Antenna RP-SMA

 1/4 Wave Whip Antenna with Flying Lead

Similar to the antenna above, this 915 MHz 1/4 Wave whip antenna has stud at the bottom for permanent mounting and a RG174 flying lead to connect the antenna to terminal. This antenna can be used for both fixed and portable applications.
915 Mhz Whip with Flying Lead


Stub Antenna

A 1/4 wave helical stubby antenna with a sheath length of approximately 55mm. This is again suitable for fixed and portable applications. The connector at the bottom can be SMA or RP-SMA and either straight or right angle. This antenna should be mounted onto a groundplane.

915 MHz Stubby Antenna


Swivel Dipole Antenna

A 1/2 wave dipole antenna for 915 MHz with either SMA or RP-SMA. The antenna can lock in vertical or horiztonal positions or at 45 degrees if required.  This antenna is groundplane indepenent so can be mounted onto non-metal (i.e. ABC, PC etc.) terminals.
915 MHz Swivel Dipole



Waterproof Compact Omni Antenna

For outdoor applications, a compact waterproof 915 MHz omni antenna might be the solution. Where a robust, weatherpoof dipole-like antenna is required, this antenna is discrete yet durable and flexible to accomodate a range of applications.

915 MHz Waterproof Compact Omni Antennas
Available with a variety of connectors including SMA, RP-SMA, N-Type, TNC,  RP-TNC with straight and some right angle versions, these antennas a Flame retardent, UV-resistant sheath and there are versions at 915 MHz for mounting onto metal or non-metal surfaces. A through hole (stud mount) version is also available based on a N-Female Panel mount connector (with O-Ring for a watertight seal plus washer and nut for locking in place onto the enclosure.

Outdoor Wall-Mount Omni Antenna

For small, wall-mounted antennas, then the wall-mounted version of the above compact omni might be well worth taking a look at. This antenna is supplied with the flame retardent and UV-resistant sheath terminated in N-Female connector and mounted on a stainless steel bracket. Jumper cables can be specified to order depending on the grade of cable required for the length of cable run required - the jumper cable requires a N-Male Plug to connect to the antenna.


915 MHz Compact Wall-Mount Omni
request more info


Directional Panel Antenna

A 10 dBi directional 915 MHz panel antenna for wall-mount and pole mount applications. Terminated in either a low loss cable or simply a N-Female connector, this antenna measures approximately 200x200x40mm and is housed in a weatherproof LURAN enclosure.
915 MHz Directional High Gain Panel Antenna
request more info

These are standard off-the-shelf 915 MHz products. This listing is not exhaustive, but is designed to give you some food for thought. For further information and for other 915 MHz antenna requirements, please contact us at sales@ead-ltd.com.

Wednesday, 30 April 2014

BWL400 low loss 50 Ohm coaxial cable specification overview

For longer low loss antenna cable runs, EAD/Specialist Antennas often turns to BWL400 cable manufactured by Italian cable specialist Beta Cavi. With a choice of connectors, BWL400 has excellent RF properties characterised by low loss per metre properties, is an interesting choice for applications up to 3 GHz and an excellent alternative to LMR400.

BWL400 cable


The attenutation figures are as follows:


BWL400 attenuation figures

We can custom build BWL400 cables to length with N-Male, N-Female, TNC-Male, TNC-Female, SMA-Male, SMA-Female, BNC-Male, BNC-Female, RP-TNC and RP-SMA connectors. For more information, please contact us. We also offer N-Male compression connectors for applications requiring high pull strength and robust N-Male plug terminations.

For those of you more technical minded, please see the technical specification below:


For more information please contact us at sales@ead-ltd.com.

Monday, 16 December 2013

Five key considerations when deploying outdoor M2M antennas

We are witnessing an increasing number of outdoor deployments of antennas for M2M applications including security and CCTV systems, utilities, telemetry and monitoring and installations on roofs, walls, cabinets and other street furniture.  These applications are using many frequencies including 4G, 3G, LTE, GSM, WiFi / WLAN, 433 MHz and other ISM bands. There are also a wide breadth of antenna choices and we often see that many customers are unsure of what to consider when deploying antennas outdoors. So through this article we would like to give you some key points to consider.

Mounting:

One of the first questions to look at is where and how you are intending to mount the antenna. Some mounting methods are more likely to pose challenges in terms of weatherproofing that others.

Outdoor can have two interpretations - either the antenna is fully exposed to all elements or that the antenna is outside, but in a protected position. The position of mounting should have an influence on the antenna selected. If the antenna is fully exposed to all the weather mother-nature can throw at it, then the quality of the antenna materials should reflect that - i.e. fibreglass or UV-resistant plastics/sheath and weatherproof metal parts that will not oxidise or rust and also high quality accessories - mounting brackets, clamps, cables and connectors.

Antennas can be independent components such outdoor antennas for pole or wall-mount when usually as long as they are of quality construction and fully sealed then the bases are covered. When the antenna is cabinet, enclosure or street furniture mounted, then there is a point where the installation can become compromised.

For through-hole mount antennas, typically you have to drill a hole in the mounting surface and the antenna will have a stud (or hollow boss) through the middle of which the antenna cable exits. The antenna stud is placed through the hole in the mounting surface and there is a nut that is screwed onto the stud from underneath (the mounting surface) and holds the antenna in place. It is important to check the quality of the stud-nut combination. A weak stud and nut configuration does not lend itself to longevity. In addition, most quality antennas will have a thick, durable gasket sitting under the antenna so when the nut is tightened there is a really watertight seal where the antenna mounts. If the stud-mount antenna does not have a gasket or simply a meagre one, best to leave well alone. As a belt and braces approach, some installers add a thick layer of Mastick (waterproof bond) between the gasket and the mounting surface - this provides an even more durable seal to ensure absolute water tightness.

Materials:

In the selection of the antenna, it is wise to understand if the radome, sheath, body and other antenna material is suitable for long term outdoor use. As mentioned previously, fibreglass or expressly UV-resistant materials should be used. There is nothing worse than purchasing an antenna with a white radome that yellows after a short time mounted outside. Also in terms of the mounting brackets and clamps, ensure that these are galvanised metal or made of materials that are not going to corrode or rust.


Sealing/Bonding:

Time and time again we come across customers who have used low cost antennas outdoors and discovered to their cost that the antennas are very lightly glued or badly bonded and within a very short period of time the antennas are suffering an ingress of moisture or worse still the sheath or radome has become detached from the antenna body. This has two costs - one is the cost of a replacement antenna, second is the cost of second site visit which usually ends up costing way more than 10 antennas in the first place! We suggest you do check how well the antennas you intend to use are sealed and bonded and whether they are robust enough to withstand long term outdoor deployment.

 Connectors:

The choice of connectors is also critical when deploying outdoor antennas. Standard M2M connectors such as SMA or FME aren't bad, but definitely fall behind N-Type or TNC connectors when considering outdoor RF installations. The N-Male / N-Female and TNC-Male / TNC-Female connectors might be larger than SMA or FME, but they are a lot more robust and can tolerate more abuse! Also it is worth considering the type of panel-mount or bulkhead connectors you intend to use - make sure you select a panel mount connector with an O-Ring so, for example, when you mount the N-Female Bulkhead Jack against the inside of an enclosure there is a rubber O-Ring sitting between the flange of the bulkhead connector and the enclosure making a nice tight seal protecting against the ingress of moisture.

Accessories:

As a rule of thumb, M2M antenna deployments are only as good as the design, the products, planning and installation. This also should include the accessories - waterproof tape, waterproof bonds and sealants help to make a good installation better. There is nothing wrong with covering an installed coaxial connector with waterproof tape to help ensure longevity. Also when deploying other products in the installation - surge protection, splitters, RF cable etc. do make sure these are designed into the installation effectively so they do not introduce a point of failure/weakness into the otherwise weatherproof installation.

We hope the above considerations will aid you in the design of your outdoor installation and the selection of the appropriate antennas and associated products. We wish you a successful deployment.