Showing posts with label MHz. Show all posts
Showing posts with label MHz. Show all posts

Sunday, 5 June 2016

Looking for LoRA or Sigfox 868 MHz or 915 MHz antenna solutions? The following list of innovative antennas might help.

The new SigFox and LoRA networks will operate in and around the 868 MHz and 915 MHz frequency bands. For these networks to operate effectively, an intelligent selection of antennas will be required to ensure that coverage is optimised.

We have listed here some interesting antenna solutions based on 868 MHz and 915 MHz that we have been working on, please feel free to contact us at sales@ead-ltd.com if you see something you like, or something similar to your requirements, but cannot see it as a released product on the EAD website.

Terminal or Enclosure-Mount Antennas

MW868

The MW868 is an 868 MHz 1/4 wave groundplane depdendent moulded whip antenna designed for small terminals and devices. Typically fed by a SMA-Male connector.

MW868 1/4 wave whip antenna


W915
The W915 is a 915 MHz  1/4 wave groundplane depdendent moulded whip antenna designed for small terminals and devices. Typically fed by a RP-SMA plug connector.

W915 1/4 wave whip antenna


HWD868
The HWD868 is an 868 MHz 1/2 wave groundplane independent moulded dipole antenna designed for non-metal terminals and devices. Typically fed by a SMA-Male connector.
HWD868 1/2 wave antenna


HWD915
The HWD915 is a 915 MHz 1/2 wave groundplane independent moulded dipole antenna designed for non-metal terminals and devices. Typically fed by a RP-SMA Plug connector.
HWD915 1/2 wave antenna


BKR868
The BKR868 is an 868 MHz 1/2 wave, groundplane independent moulded antenna with a multi-position SMA connector allowing the antenna to lock in three orientations.

BKR868 1/2 wave multi-position antenna


BKR915
The BKR915is an 915 MHz 1/2 wave, groundplane independent moulded antenna with a multi-position RP-SMA plug connector allowing the antenna to lock in three orientations.

BKR915 1/2 wave multi-position antenna


PTF868/PTF915
The PTF868 and the PTF915 antennas are 1/2 wave 868 and 915 MHz antenna respectively. They are both captive-mount antennas meaning that they held in place by a stud at the end of the antenna secured by a nut. The antennas are fed by a micro-coax cable with SMA or U.FL/IPEX connector. Ideal for offering a solution where removal of the antenna is discouraged.


PTF868/PTF915 1/2 wave captive antenna


WR868
The WR868 is a 1/4 wave stub antenna operating at 868 MHz. It can be supplied with a SMA or RP-SMA Right-Angle connector. A 915 MHz version is also possible.


WR868 1/4 wave stub antenna

WS868
The WS868 is a 1/4 wave stub antenna operating at 868 MHz. It can be supplied with a SMA or RP-SMA Straight connector. A 915 MHz version is also possible.

WS868 1/4 wave stub antenna


Outdoor Antennas

HGO-868-915
The HGO is an 868 MHz / 915 MHz high gain outdoor omni-directional antenna offering approximately 5 dBi. Supplied with 5M of cable as standard with a SMA-Male or RP-SMA connector, the HGO is unrivalled in terms of price/performance and ideal for areas where a high gain omni-directional antenna is required. This antenna can be wall or pole mounted.

HGO-868-915 high gain omni antenna


WCO-868-WMB / WCO-915-WMB
The WCO-868-WMB/WCO-915-WMB is a compact, wall-mount omni antenna operating at 868 or 915 MHz. Designed for continuous outdoor use, the antenna is mounted on a stainless steel bracket and offers approximately 2 dBi in the target frequency bands. It can be supplied with a variety of low loss RF coaxial cable as the application requires.
WCO-868-WMB/WCO-915-WMB compact wall-mount omni antenna


WCO-868-WMB-HIGAIN
The WCO-868-WMB-HIGAIN is a 868 MHz, wall-mount, omni-directional antenna based on the WCO antenna above, but with a reflector element to enhance the gain to approximately 5 dBi. This is a very compact and discreet antenna for continuous outdoor, but with superior gain performance. It can be supplied with a variety of low loss cables as required.

WCO-868-WMB-HIGAIN antenna



WCO-915-WMB-HIGAIN
The WCO-915-WMB-HIGAIN is a 915 MHz, wall-mount, omni-directional antenna based on the WCO antenna above, but with a reflector element to enhance the gain to approximately 5 dBi. This is a very compact and discreet antenna for continuous outdoor, but with superior gain performance. It can be supplied with a variety of low loss cables as required.

WCO-915-WMB-HIGAIN antenna


LPS868-NF
The LPS868 is an 868 MHz directional panel for wall-mount or pole mount applications. Offering more gain than a typical omni-directional antenna, the LPS868 is compact and robust and suitable for long term outdoor deployments.
LPS868 directional panel antenna

Tuesday, 30 September 2014

New wideband VHF low profile antenna for transportation applications

Specialist Antenna Solutions (SAS) is pleased to introduce a new VLP300 VHF low profile antenna for bus applications.

The VLP300 is a market-leading, proven VHF low profile antenna designed to be mounted on vehicles such as buses, trucks, coaches and vans operating under very severe height restrictions.. Until now, there have been three versions available:  a single band antenna, a field-tunable antenna and a dual band (dual resonance) antenna.

The single band antenna has now been enhanced to become a wideband antenna offering 10 MHz of bandwidth at -10 dB return loss or better. This means that it is effectively widebanded enough to cover the spread of both Rx and Tx bands in many VHF transportation applications.

VLP300 VHF Low Profile Antenna
The VLP300 antenna uses an innovative design to give an omnidirectional pattern with vertical polarisation.
This antenna is wide band and does not need tuning in the field. It is housed in a tough ABS enclosure. The unit is supplied, fully assembled, sealed and ready to be fitted on its intended mounting surface.

The specification is as follows:

Electrical
Frequency Band:   (Mobile) 160 MHz - 210 MHz ( Selected Centre Frequency in the band)
Bandwidth:           ~ Wide Band 10 MHz (See Figure 1)
Gain:                     Unity Gain
Radiation Pattern:  Omnidirectional
Nominal Impedance: 50 Ohm
VSWR:                  2.0:1.0 (~ 10 MHz Bandwidth)
Maximum Input Power: 100 W

RF Interface
Output Connectors: BNC male Connector (Plug)
Feeder Cable:         BWL 195 cable (Low Smoke Zero Halogen)

Mechanical
Size (W x D x H):    460 mm x 460 mm x 60 mm
Weight:                    2.5 Kg
Operating Temperature: -40o C to + 70o C
Weather Proof Sealed Unit

Materials
UV stabilised ABS plastic / Polypropylene (Radome)
Aluminium Base Plate
Colour Finish: White
Mounting Method: Base plate fixing through screws or rivets to
vehicle roof.

For more information, please contact us at Specialist Antennas.